Display adapters are often required to display the correct screen resolution, but they can sometimes get disabled on Windows PCs. This is a common issue that troubles many PC users who want to fix this problem by updating their drivers or deleting and reinstalling them from Device Manager.

The “display adapter not showing in device manager windows 10” is an issue that can cause a lot of problems. The article will show you how to fix the issue with ease.

Is the whole display adapter tab in Device Manager missing? Don’t be concerned. You may try the procedures below to see if one of them fixes the problem.

Method 1: Use the Command Prompt to reveal hidden devices. Method 2: Select Add Legacy Hardware from the drop-down menu. Method 3: Update the graphics card and chipset drivers. Restore BIOS (method 4)

Method 1: Use the Command Prompt to reveal hidden devices.

You may use Command Prompt to reveal hidden devices and see if that helps. Take the following steps:

1) To open the Run box, press Win+R (the Windows logo key and the R key) at the same time on your keyboard.

2) In the Run box, type “cmd.”

Easily-Fix-Display-Adapter-Not-Showing-in-Device-Manager-Issues

3) Press Shift+Ctrl+Enter on your keyboard at the same time to start Command Prompt as administrator.

4) Press Enter after typing “devmgr show nonpresent devices=1”.

1638516883_173_Easily-Fix-Display-Adapter-Not-Showing-in-Device-Manager-Issues

5) Check to see whether the display adapter tab is visible in Device Manager. If it appears, you may see that the device is deactivated, in which case you must manually enable it. Simply right-click on the device and choose Activate device to enable it.

Try Method 2 if Method 1 doesn’t work for you.

Method 2: Select Add Legacy Hardware from the drop-down menu.

You may manually add the display adapter category and graphics card in Device Manager using the Add Legacy Hardware option. Take the following steps:

1) Go to Device Manager and open it.

2) Select Add legacy hardware from the Action menu at the top.

1638516884_908_Easily-Fix-Display-Adapter-Not-Showing-in-Device-Manager-Issues

3) Select Next on the Add Hardware box.

1638516885_500_Easily-Fix-Display-Adapter-Not-Showing-in-Device-Manager-Issues

4) Make a decision Install the hardware from a list that I personally selected (Advanced), then click Next.

1638516886_342_Easily-Fix-Display-Adapter-Not-Showing-in-Device-Manager-Issues

5) Click Next after selecting Display adapters.

1638516888_581_Easily-Fix-Display-Adapter-Not-Showing-in-Device-Manager-Issues

6) In the “Manufacturer” area, you’ll have a number of alternatives to pick from. Select the choice that corresponds to your graphics card, such as Intel or AMD. If you don’t have a choice, go with Microsoft. Then choose the Model that corresponds to the chosen Manufacturer.

Then press the Next button. After that, the device will be set up on your computer. Wait for the procedure to complete.

1638516889_954_Easily-Fix-Display-Adapter-Not-Showing-in-Device-Manager-Issues

7) After that, look in Device Manager to see whether the display adapter tab and the graphics card device appear. If your graphics card isn’t showing up properly, you’ll need to upgrade the driver. Method 3 should be used if you don’t know how to update the driver.

Method 3: Update the graphics card and chipset drivers.

Faulty chipset and graphics card drivers might cause the display adapter tab missing in Device Manager issue. To check if it helps, try upgrading the chipset drivers and graphics card drivers.

You may use Driver Easy to help you install the drivers quickly and accurately. Driver Easy is a driver updating tool that has over 3 million users worldwide. You may use it to scan your computer for any problematic drivers, and then install the updated driver with only a few mouse clicks.

To update your chipset and graphics card drivers, download and run Driver Easy Free. The display adapter tab not displaying in Device Manager problem may be addressed by upgrading the drivers.

1638516890_131_Easily-Fix-Display-Adapter-Not-Showing-in-Device-Manager-Issues

Restore BIOS (method 4)

One of the reasons of the display adapter missing issue is incorrect BIOS settings. You may try resetting the BIOS to factory settings to resolve the issue. Depending on the computer manufacturer, the processes to restore BIOS are different. However, you may follow the procedures outlined below to give it a go.

IMPORTANT: Improper BIOS modification might result in major system problems. Make sure you understand what you’re doing. If not, you should seek assistance from the manufacturer.

1) Go into BIOS mode.

To begin, turn on your computer. Restart your computer if it is already turned on.

On the load screen after starting your computer, you should notice a message indicating which key to press to enter BIOS (F2, DEL, F8, etc.). If you keep pushing that key, you’ll be able to go into BIOS.

1638516891_642_Easily-Fix-Display-Adapter-Not-Showing-in-Device-Manager-Issues

2) Once in the BIOS, press F9 or F5 to get a prompt that will enable you to restore the BIOS. The option is also available under the Security tab or the Exit tab.

Depending on the motherboard you have, the option to restore BIOS has a different name. Reset to Default, Load Factory Defaults, Load Setup Defaults, Load Optimized Defaults, and so on are all options.

1638516893_346_Easily-Fix-Display-Adapter-Not-Showing-in-Device-Manager-Issues

3) Press the arrow key to choose Yes, and the BIOS will be reset.

4) When you’re finished, hit the key next to Save and Exit to exit.

5) Restart your computer and verify whether the problem has been resolved.

I hope you found the information in this post useful. Please leave a remark below if you have any queries. I’ll get back to you as soon as possible.

Watch This Video-

The “windows 10 wireless display not working” is a common issue. There are a few fixes that can help you fix the problem.

Frequently Asked Questions

Why is my display adapter not showing in Device Manager?

A: It is likely because your graphics card has an AMD chipset, and Windows 10 does not recognize it. You can contact the manufacturer of your graphic card to see if they have drivers available for you.

How do I get my display adapter back in Device Manager?

A: Restart your computer and press Win+R. Then type devmgmt.msc into the text box on the window that appears and press enter to open Device Manager.

How do I fix a missing display driver?

A: In this case, the display driver is missing. There are a few steps you can take to fix it. The first would be to open up your device manager and update all of your drivers manually. This could also work as well if you had an external monitor plugged into your computer that was working fine before; unplug the monitor from your computer and restarting should do the trick for now until you get a replacement monitor or have time to go back in again and update them properly on Windows Update. Another option is trying plugging in another USB drive into one of the ports on the front right side of your PS4 console where theres usually 3 ports- try plugging in any other USB devices with no luck here either? You could also try going online at https://www.playstationsupportcenter.com/en-US/home/fixdisplaydriverissues

  • display adapters not showing
  • display adapters device manager
  • nvidia display adapter missing windows 10
  • amd graphics card not showing up in device manager
  • device not showing in device manager windows 10
You May Also Like

HP Omen X 900 Gaming Desktop Review & Price

The HP Omen X is a gaming PC that is designed to…

Simple Tutorial on How to Install Stream Army Addon on Kodi

The best way to watch movies and TV shows on Kodi is…

Download Marble Blast 3 for PC Windows 10,8,7

Marble Blast 3 is the latest installment of a long-running series that…

How to Install Wrestling On Demand on Kodi 17.6 Krypton

If you have a Raspberry Pi running Kodi 17.6 Krypton, then you…